Home » Products
  • AC Axial FanFrame: The outside frame of the AC axial fan is made of high quality aluminum alloy
    Anticorrosive and moisture-proof impeller: UL94V-0, 70% PBT, +30% FRP
    Bearing: Sleeve bearing and ball bearing
  • AC Out Rotor Motor FanMaterial used in making the AC outer rotor motor fan:
    Grid: Steel, which has undergone surface treatment, coated with black plastic or paint.
    Wall ring: Sheet steel, which has undergone surface treatment, coated with black plastic or paint.
  • SA120X120 Fan FilterMaterial of ventilated net body: Flame-retardant ABS resin
    Filter screen material: Nylon fiber synthetic resin
    Pressure loss of filter screen: Initial 6.9mmAQ final 24mmAQ
  • ZL-801 Fan FilterThe ultra-thin filter can not only be used as an inlet of low-temperature clean air, but it can also be used as an outlet of high-temperature air. There is a filter pad of non-woven fiber, used to prevent dampness and dust. Generally, this filter is used together with the axial fan.
  • ZL-803 Fan Dust FilterExquisite design: The elegant shell is of ultra-thin design. The ventilator is designed at a 45-degree angle so as to obtain optimum ventilation, waterproof and dustproof effect. The use of a sealing washer at the rear end of the filter gauze further improves product's water-proof performance.
  • CT-205 Fan Dust FilterThe ultra-thin filter is mainly used together with the axial fan. It can not only be used as an inlet of low-temperature clean air, but it can also be used as an outlet of blowing off the high-temperature loads. The precondition for using it is that the environmental temperature should be lower than that required for inner of cabinet. ...
  • SA Cam SwitchSA series cam switches offer a solution for cam switch applications. Different contact designs, contact materials and terminals allow for their use as control switches, instrumentation switches and motor control switches, as well as in electronic circuitry and in aggressive environments according to IEC 60947-3.
  • SAP Padlock SwitchSAP series padlock switch is the derivative of SA series switches. The switch is installed in equipment where it requires a padlock to lock the switch in certain position. For instance, fix the switch in ON position, to avoid the unauthorized personnel from operating the switch.
  • SAK Cam SwitchSAK series cam switch is a key lock type switch which is the derivative of SA rotary switch. It is installed in equipment which requires a key to lock the switch. The switch prevents the mis-operation of the equipment from the unauthorized personnel.
  • SAB Cam Switch SAB cam switch is applied in switchgear and is used for control of electric motors as well as for changeover of electric circuits. It's a good substitute for other cam switches.
    Type: SAB16-A-B, SAB25-A-B, SAB32-A-B, SAB50-A-B, SAB75-A-B
  • SAA Isolator SwitchCurrent rating: 16A, 20A, 25A, 32A, 40A, 63A, 80A and 100A
    Voltage: 440VAC
    Function: OFF-ON
  • SAA Door Lock Safety SwitchFor example:
    SAA16/300030 door lock safety switch: It is 16A, 3pole, normal faceplate installation.
    SAA32/400040 door lock safety switch: It is 32A, 4pole, faceplate installation with multi padlock.
  • Manual SwitchesB: stands for middle operated load isolation switch
    C: stands for side operated load isolation switch
    L: stands for side operated onload changeover switch

As an experienced manufacturer of axial fan, cam switch and panel meter, we at we offer a wide line of AC axial fan, AC out rotor motor fan, waterproof cam switch, padlock switch, analog panel meter and digital panel meter for customers to choose from. In addition, we also offer change over switch, push button switch, LED indicator, electric wire and other products. With our vast range of products, we are confident we can satisfy each customer's requirements.

With years of experience in the electrical industry, we at we know the importance of product quality. Therefore, we purchase raw materials from reliable suppliers, perform regular maintenance on our processing equipment, and manufacture our products in strict accordance with standards and drawing requirements. Additionally, our QC personnel will perform a final quality inspection of our axial fan, cam switch and panel meter prior to shipment to ensure only qualified product reach our customers. As a result of our efforts, our products are high quality, and are CE, UL and TUV certified.

If you have a need for any of our axial fan, cam switch, panel meter or other products, please feel free to contact us. We look forward to working with you.